Latviski In English По русски Deutsch
Eco wool application (work in)

Eco wool work in constructions

1. Horizontal application

  • Attic ceiling, density 35 kg/m 3
  • Heat and sound insulation floor, density 40 kg/m 3

2. Vertical application
Wall constructions
:

  • External wall (humid  covering by way of spraying), density 35 kg/m 3
  • Vertical “flanks” (dry work in), density 65 kg/m 3

Different methods of application (working in) of ecowool wool

1. Humid application
Humid application is used on the open walls constructions. The material is sprayed being wet and mounted apiece in the narrow and hard-to-get areas of the building constructions. Having been dried the material is strongly adhered to the surrounding surfaces which prevents from possible surface deformation.

 

2. Dry application
Dry application is used in horizontal and diagonal constructions, for example, on floors or roof slope. Dry insulation material is pulverized into cracks and fills in even the finest cracks of the constructions.

 

ENCASING MULTI-STOREY BUILDING UPPER CEILINGS FOR WARMTH-KEEPING


 

Dry application. It is used for horizontal overhead cover, for example, for ceilings.

1.  Concrete slab
2.  Anti-wind plastic (if necessary)
3.  Roof frame
4.  Lathing
5.  Roofing iron

Construction (the enumeration has been given starting from above)
Upper ceiling (overhead cover)

  • The ecowool wool layer 220 mm thick (volume density - 35 kg/m³)
  • Hollow plate A60°

 

 

WOODEN CONSTRUCTION EXTERNAL WALLS WITH BOARD SHEATHING, ENCASING THE SAME FOR WARMTH-KEEPING

 

Humid application. It is used in the open wall constructions.

Construction (it is enumerated starting from outside)

  • vertical board sheathing
  • air gap
  • wood particle board 12 mm thick
  • 150 x 50 K600 vertical framework
  • ecowool wool 150 mm thick (volume density - 65 kg/m³)
  • wood particle board 12 mm thick. The boards are nailed according to the special instructions

 

ENCASING PRIVATE HOUSE UPPER CEILING FOR WARMTH-KEEPING

 

 

Dry application. It is used for encasing the upper ceiling for warmth-keeping.

1. Attic not used. 

Construction (the enumeration has been given starting from above)

  • roofing iron,
  • lathing
  • roof frame
  • sheathing of the space under the rafts (if necessary)
  • upper ceiling
  • ecowool wool layer 220 mm thick (volume density - 35 kg/m³)
  • Strong paper or firm plate 3,2 mm thick
  • lathing
  • construction board 12 mm thick 

 

ENCASING OF THE SLOPING UPPER CEILINGS OF WOODEN CONSTRUCTIONS FOR WARMTH-KEEPING

 

Dry application.  It is used for sloping upper ceilings, for example, pitch of a roof.

Construction (the enumeration has been given starting from above)

  • roofing felt (tar-paper)
  • non-dubbed edged board
  • 20 mm air gap
  • firm plate 3,2 mm thick 
  • wooden beam 200 x 50 K600 
  • ecowool wool layer 200 mm thick (volume density - about 50 kg/m³)
  • cardboard
  • sheathing
  • panel board or construction plate

Upper ceiling. Hollow plate Variax - V5. Eco cotton wool coefficient ''K''
(''K'' has been calculated taking into account wooden constructions.)

<<  BACK